Planck EOTW Plate Kit

bottom-34.jpg
top-34.jpg
bottom-front.jpg
full-34.jpg
bottom-34.jpg
top-34.jpg
bottom-front.jpg
full-34.jpg

Planck EOTW Plate Kit

from 12.00

The EOTW (easy-on-the-wallet) plate kit comes with an MX top plate, and a decorative bottom plate designed by Katie Doodles - both are made out of FR4 (PCB material). The top plate has a matte black side and a gold side. The Grid layout plate is missing copper/gold in the center part as shown in the photo (this was a mistake, hence it being cheaper!).

EOTW top plates are not compatible with Lo-Pro cases because they don't have any holes.

The Planck PCB (rev 5 or later) attaches to the bottom plate via 10 spacers + screws (included). The space between the USB port and the bottom of the rubber feet (also included) is less than standard cases, so you may want to use a slimmer USB cable, or thicker rubber feet. The bottom plate doesn’t have a hole for the reset button, but this will change in future batches.

See more of Katie's work: http://katiedoodles.com/

Layout:
Quantity:
Add To Cart